Using heat-resistant paint effectively or not is something that many people are interested in. Because this type of paint has advertising, reducing 12-25 degrees Celsius is extremely attractive, but the price is super expensive.
What is heat resistant paint?
Heat-resistant paint (or heat-insulating paint) is a type of paint that in its composition has film-forming substances that are able to insulate and reflect sunlight. This type of paint is often painted on surfaces exposed to direct sunlight such as corrugated iron roofs, exterior walls, terraces...
Heat resistant paint has outstanding advantages such as:
Affordable compared to other solutions, less expensive to maintain
The heat reduction effect is very obvious, making the house much cooler
Convenient, easy and fast construction. For residential houses, the owner can do it by himself.
However, not all heat-resistant paints offer all of the above advantages, so you should use caution.
Is using heat resistant paint effective?
Using anti-heat paint effectively is a question of many families. In fact, the effectiveness of heat-resistant paint is highly dependent on the thickness of the paint layer. The higher the thickness, the higher the efficiency. Tests show that with 2 coats, an insulation effect of about 12-25 degrees Celsius can be achieved.
Depends on the specific characteristics of the house. The lower the roof, the more clearly the effect of the paint is felt. The temperature of the surface under the corrugated iron roof can be reduced from 12-25oC or 4-5oC depending on the type of paint.
Is heat resistant paint durable?
The durability of the sunscreen coating depends on the quality and technique of the paint. With average quality and 2-layer paint style, heat-resistant paints have the highest efficiency from 3-5 years. By the 6th year to achieve the same effect as the original, it is best to repaint it again.
In addition, on the market today, there are multi-purpose heat-resistant paints. Paint has other outstanding features such as chemical resistance, waterproofing, protection of walls and roofs from weather and environmental impacts. If using this paint for corrugated iron roofs, it is also possible to reduce noise when it rains.
Which type of heat resistant paint is best?
Old insulation coating technology: has low efficiency, difficult to use because it is easy to layer, it is difficult to stir and mix well. This type of paint causes many difficulties in the construction process such as heavy-handed sweeping, easy to block paint sprayers.
Paint using advanced technology: much higher insulation efficiency, no layering and very gentle stirring, sweeping with brush, rolling or spraying is easy, without clogging the nozzle.
Note when choosing to buy anti-heat paint:
Efficient temperature reduction is the most important feature.
You should pay attention to the cost of use per area, not the price of paints. Many types of paint are expensive, but the cost of use on the area is cheaper than the lower-priced paints.
The ease of use of paint also needs to be noted. Difficulties in construction will cost you a lot of extra time or extra costs.
In the summer, the west-facing house absorbs more heat than the other house directions. Therefore, to make the house in the West still cool, you can refer to the following 5 ways to prevent heat from the West facing house. These are the optimal methods recommended by experts against heat on the west wall.
Build the right structure:
Right from the time of building a house facing the West, homeowners should anticipate the absorption of a large amount of heat from this direction of the house. So, when building, homeowners should:
Build the main door wall indented inward from 1-2m. The upper balcony will shade the ground floor. At this indented construction site, the homeowner can arrange green trees, small lakes, and make flower trellis to climb the wall.
If there are no conditions on the area and cost of building the upper truss, it is possible to use plywood walls & wooden frames, steel attached directly to the inside of the wall, plaster plaster for plywood.
This is one of the very effective ways to prevent heat from the west wall, has been built in many projects so far and the efficiency has never decreased.
Two-layer wall construction:
Experts against heat on the west wall also recommend that families with this direction should build 2 layers of walls to keep the house cooler. This 2-layer wall has a thickness of about 330, two layers of 110-hole bricks are built parallel to each other, ensuring a wall gap of about 10cm. It is this wall slot that is the insulation for indoor and outdoor air. When the outer wall is heated by heat, the inner wall remains cool.
If you don't build a brick wall, you can fill the wall with concrete about 25 to 30cm. With this thickness, the outside temperature can hardly penetrate to the inside, or if there is, much less.
Using insulation for the inside of the wall:
Another way to prevent heat from the west wall is to pay attention to the inside of the wall. You can use insulation materials such as heat-resistant paint, wood paneling, PU foam, insulating film, etc. These materials will minimize the penetration of outside heat into your house. friend.
Use anti-heat paint on the outside wall
Using heat-resistant paint for external walls is also recommended by experts against heat-resistant walls in the West. However, special care should be taken in the selection. Should consult from reliable sources to buy suitable and quality paint. And don't forget to choose colors that absorb less heat. In it, it is recommended to choose lighter tones and use heat-resistant foam paint.
Increase the amount of trees to cover the house
This way of fighting heat for the west-facing wall has never stopped being hot. If any family has conditions on area, they should take advantage and plant trees around the west wall to cool the wall. Can be flower trellises, large plants, climbing plants. As long as you can cover the walls as green as possible.
Corrugated iron roofs are widely used from factories to garages or drying yards of households... However, in the summer, corrugated iron roofs absorb more heat, causing an uncomfortable feeling of heat. . One of the solutions to help cool down is heat-resistant paint for corrugated iron roofs.
Why should you choose heat resistant paint for corrugated iron roof?
Currently, there are many solutions to prevent heat from corrugated iron roofs such as: spraying water on the corrugated iron roof, using insulation or using misting fans, air conditioners, etc. However, each solution has different advantages and disadvantages. With heat-resistant paint, corrugated iron roofs will overcome some disadvantages of other solutions such as:
More cost-effective than installing sprinkler systems for corrugated iron roofs or air coolers.
Protect your health and home electronics more than using a misting fan.
Long-lasting effect that still ensures more aesthetics than the use of insulation materials. Not to mention those materials can burn due to high temperatures or some carelessness.
Therefore, heat-resistant paint for corrugated iron roofs is becoming an effective and popular solution today. If you want to use this solution, you should note the following.
Effect of anti-heat paint on corrugated iron roof:
Learn more about how to prevent heat from corrugated iron roofs from heat resistant paint color, the following effects will be the basis for you to decide whether to choose or not:
Cost savings, aesthetics, safety and health protection (as mentioned above)
Fast and obvious heat reduction effect
Fast construction even with different large and small areas
Most of today's corrugated iron roof paints have high chemical resistance and water resistance. Thus, effectively protecting the corrugated iron roof from the effects of the weather. Not to mention, in the rainy season, the corrugated iron roof is painted to resist heat and also reduces the sound of rain.
How to use heat resistant paint on corrugated iron roof
When you have decided to resist the heat of the corrugated iron roof with heat-resistant paint, you should learn more about the types of paint that quickly heat the corrugated iron roof. Often the market today has water-based paints painted according to old paint technology and new paint technology.
When painting, you should note:
It is best to paint the entire corrugated iron roof that needs heat resistance
The higher the thickness, the better the heat resistance effect. If 2 coats can be 300 microns thick, the effect can be reduced by 15 to 20 degrees Celsius.
The rusted, old corrugated iron roof can still be painted to resist heat. Both protect the corrugated iron roof, and save the cost of buying a new one.
The effectiveness of heat-reducing paint for corrugated iron roofs depends on which paint you choose and whether the paint technology is new or old. It is recommended to use new technology to spray without clogging, not layering and stirring evenly.
What is insulation paint?
Insulation paint, also known as heat-resistant paint, heat-resistant paint, ... Insulating paint products used for walls have many commonly used insulation paints such as roller, sweep, spray, paint. Spray insulation on all different surfaces to insulate against waterproofing and still take advantage of natural light, insulation paint for corrugated iron is commonly used.
Classification of insulation paint
On the market today, there are product lines of colorless heat-insulating paints, heat-insulating nano paints, insulating paints for insulating painted walls for metal surfaces, concrete roof floors, outer walls, etc. Enhanced heat resistance and waterproofing.
Insulation paint properties
Insulation paint is highly water resistant and will not peel or crack after 96 hours of immersion. Insulation paint has good heat resistance according to test results showing that under the influence of temperature 60°C within 24 hours and immersed in water at 23°C, the paint film does not peel or peel. cracked. The test was carried out for the insulation paint on the wall on the corrugated iron with a temperature of 60°C within 24 hours and tested the durability by bending the shaft 12mm, resulting in the insulating paint film still not cracking.
Classification of current insulation paints
Insulation paint for walls
Insulation paint for glass
Paint insulation for corrugated iron roof
Insulation paint for metal
Insulation paint
Principle or dynamics of insulation paint
Insulation paint is an easy-to-use and highly effective product for effective insulation. Insulation paint is used on many different surfaces, but the principle of operation is relatively similar and will have the same basic operating principles. The nature of liquid insulation paint and high adhesion is easy to apply, replace, and repair.
Using wall insulation paint is effective?
Insulation paint ensures preeminent features, cheap price ensures product quality, is easy to apply, just use specialized products to clean the surface, then use insulation paint for walls, substances in insulation paint. Heat can block sunlight and help insulate your home. Using Kingcat Paint insulation paint, the results show that the insulation efficiency is reduced from 4°C-60°C compared to the outdoor temperature, helping to reduce the indoor temperature and reduce the summer cooling devices and appliances. heating in the summer and heating devices in the winter.
Instructions on how to use insulation paint for walls
Clean the surface of the wall to be applied with a specialized cleaning product.
For the wall layer, use layer 1 to mix 20-30% of clean water, after layer 1 is dry, mix layer 2 with 5-10% of clean water.
Note: Before use, it is necessary to stir the paint and do not apply when the environment is raining or sunny, the humidity is over 85% and the temperature is below 5°C, the paint will not have its inherent effect.
It is recommended to apply in the morning or afternoon at a temperature not exceeding 35°C to achieve the best effect.
Store paint in a cool place away from heat and direct sunlight.
How to maintain wall insulation paint?
If the surface of the insulation coating is not damaged, you should clean the surface every 2 to 3 years periodically and then apply 1-2 coats on top.
What to do after applying the surface with water bubbles?
There are a number of reasons that lead to bubbles after applying insulation paint to walls: the structure has not been dry, the construction surface has a waterproof layer or has not been completely cleaned, the paint is too thick, etc. ..If there are bubbles, use a knife to cut, then repaint the primer and topcoat.
Does the insulation coating need dilution?
This coating has a high viscosity due to its high resin content. If the surface is too rough, it will not be easy to apply. Can be based on product properties - water or oil based, add up to 10% water or acetone, then stir well and apply paint.
What is the difference between primer and topcoat?
The main feature of primer is to increase the adhesion of texture and surface paint, as a substrate to increase alkali resistance and increase the coverage of surface paint. The main function of face paint is to create a waterproof layer, other properties please refer to the description of each product.
What if the painted surface is a corrugated iron roof?
If the construction surface is corrugated iron roof, container, metal surfaces in normal condition, it can be painted directly on the surface. As for the old surface, it is necessary to treat the rust layer first, apply an anti-rust layer, then use a primer, and then apply an insulating coating.
Treatment direction for non-cement surfaces?
If the roof floor is floor tiles, ceramic tiles, porous cement, you can first use primer, spread evenly on the surface to strengthen the waterproof bond, then choose suitable waterproofing materials to apply. This helps to prevent the surface from becoming waterlogged, foaming and peeling. If the ground has been covered with asphalt, oil-based paint or concrete surface, it is recommended to make a 3~5cm layer of cement surface first and then apply the above construction method.
How to choose the right insulation?
Please visit the "PRODUCT" page to search based on the range of uses and product characteristics to be able to choose.
What are the benefits of applying insulation coatings?
The use of insulation coatings not only effectively reduces the amount of air conditioning used, but also saves electricity costs, and also has other uses such as anti-rust and waterproofing, prolonging the service life of painted surface.
What kind of paint is outdoor waterproof paint?
Waterproof paint is a special compound that is resistant to water. This waterproof paint layer has the ability to create a protective film to help prevent water penetration to the surface of the building, also known as water-resistant paint, limiting the influence of extreme weather. Therefore, it can be said that using waterproof paint is a mandatory process for every project.
Advantages of waterproof paint
Choosing outdoor waterproof paint for the project brings a lot of outstanding advantages, which can be mentioned as:
After applying waterproof paint, this paint layer will create a layer to protect the house from the influence of water, preventing water from entering the house. Minimize the seepage, wall mold, algae growth, damage and peeling of the current paint layer. Avoid loss of aesthetics for the house and save on painting and repair costs.
Easy to apply, fast construction time, can use brush or roller without using any machinery or equipment.
There are many types of waterproof paint with many specific uses for you to choose from: waterproof, anti-mildew, anti-heat, anti-alkali and salt-resistant...
Can be used for many different surfaces: toilet, swimming pool, house wall, bass, roof deck, terrace...
Safeguard furniture and equipment in the house. Thanks to the waterproof and moisture-proof function for the wall, furniture made from wood or electronic equipment is not moldy, causing damage.
Environmentally friendly, waterproof paint uses safe materials, non-toxic to humans and the environment.
Diverse types and functions to meet the unique needs of each customer.
Outdoor waterproof paint price
Currently on the market of outdoor waterproof paint lines with equivalent features, there are some products that will have superior advantages in some features and competitive outdoor waterproof paint prices will be almost the same. equally different.
Classification of waterproof paint based on the base has 4 types:
Cement based waterproof paint
This type of waterproof paint includes 2 types: 1-component cement-based waterproofing and 2-component cement-based waterproofing. This cement-based waterproofing paint has long-lasting water-resistant surface adhesion. The disadvantage of cement-based waterproofing paint is that it is not elastic, so its ability to withstand strong vibrations is poor.
Bitumen Polymer based waterproof paint
Liquid and sweepable type waterproofing membrane and torch screen waterproofing. The advantage of this outdoor waterproof paint is that it is easy to apply quickly and is not picky about painted surfaces, but the disadvantage is that it is durable and has a shorter film life than other waterproof paints.
Silicate-based waterproof paint with penetrant form
Water-repellent paint has good adhesion and does not leak from the inside, extremely durable and can be used in all waterproofing incidents. The cost of these waterproof paints is quite high.
PU-Polyurethane-based waterproofing
Two-component, liquid-based, solvent-based waterproofing products are multi-functional. PU waterproofing products have high adhesion and durable surface coverage and extremely good elasticity, covering cracks, the price of this PU-based waterproof paint is quite high.
We are currently supplying footwear products, fine machining, beautiful design, durable, specializing in footwear, fabric masks, brocade sandals, nf shoes, nf sandals, nf shoe insoles, flip flops nf finger, nf slippers, nf export sandals, nf slippers, Footwear company in Ho Chi Minh City Vietnam,...
Website: https://giaydepnf.com/
0 nhận xét:
Đăng nhận xét